[1] ISO 1456：2003,metallic coatings—Electrodeposited coatings of nickel plus chromium and of coper plus nickel plus chromium

[2] ISO 1458:2002,metallic coatings—Electrodeposited coatings of nickel
[3] ISO 1513:1992,Paints and varnishes—Examination and preparation of samples for testing
[4] ISO 3270:1984,Paints and varnishes and their raw materials—Temperatures and humidities for conditioning and testing
[5] ISO 3613:2000,Chromate conversion coatings on zinc,cadmium,aluminium-zinc alloys and zinc-aluminium alloys—Test methods
[6] ISO 3696:1987,Water for analytical laboratory use—Sepcification and test methods
[7] ISO 4520:1981,Chromate conversion coatings on electroplated zinc and cadmium coatings
[8] ISO 4527:2003,metallic coating—Autocatalytic(electroless)nickel-phosphorus alloy coatings Specification and test methods
[9] ISO 4628-1:2003,Paints and varnishes—evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity lf uniform changes in appearance—Part 1:General introduction and designation system
[10] ISO 4628-2:2003,Paints and varnishes—evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 2:Assessment of degree of blistering
[11] ISO 4628-3:2003,Paints and varnishes—evaluation of degradation of coating—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 3:Assessment of degree of rusting
[12] ISO 4628-4:2003,Paints and varnishes—evaluation of degradation of coatings—Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part 4:Assessment of degree of cracking
[13] ISO 4628-5:2003,Paints and varnishes—evaluation of degradation of coating —Designation of quantity and size of defects,and of intensity of uniform changes in appearance—Part:5Assessment of degree of flaking
[14] ISO 4628-5:2003,Paints and varnishes—evaluation of degradation of coatings —Designastion of quantity and size of defects,and of intensity of uniform changes in appearance—Part 8:Assessment of degree of delamination and corrosion around a scribe
[15] ISO 7253:1996,Paints and varnishes—Determination of resistance to neutral salt spray(fog)
[16] ISO 7599:1983,Anodized of aluminium and its alloys—General specifications for anodic oxide coatings on aluminium
[17] ISO 8993:1989,Anodized aluminium and aluminium alloys—Rating system for the evaluation of pitting corrosion—Chart method
[18] ISO 8994:1989,Anodized aluminium and aluminium alloys—Rating system for the evaluation of pitting corrosion—Grid method
[19] ISO 10289:1999,Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates—Rating of test specimens and manufactured articles subjected to corrosion tests
[20] ISO 15528:2000,Paints,varnishes and raw materials for paints and varnishes—Sampling
[21] SHIGERU SUGA and SHIGEO SUGA,”Report on the results from the ISO/TC 156/WG 7 International Round Robin Test Programme on ISO 9227 Salt spray tests”;Surface Finish.Soc,Japan;Vol,56,p.28(2005)

最新鹽霧試驗(yàn)箱GBT10125-2012標(biāo)準(zhǔn)【參考文獻(xiàn)】